Roy Abendroth's 1955 Buick Century - The Busonic

From Kustomrama
(Redirected from Roy Abendroth's 1955 Buick)
Jump to: navigation, search
Roy Abendroth originally wanted Richard Axcell to give his 1955 Buick custom a Metalflake paint job. Too busy doing everyday cars, Axcell told Roy to see his buddy Larry Watson. Roy told Watson that he was interested in something different for the car. Watson, who had just recently painted Ron Aguirre's X-Sonic, told Roy about the lifts Ron had installed on his Corvette to adjust the ride height by the touch of a button. That was something brand new that caught Roy's interest, so he approached Aguirre about having him install lifts on his Buick as well. Ron accepted the offer, and Roy drove the car up to Fontana to have Ron install lifts up front. Afraid of damaging the paint, Roy figured out it was safer to install the lifts while the car was still in primer. "Ron took it apart and put all the lifts in. From what I understand, the lifts were built from parts from an aircraft. Like a piper cup or something like that. Componentes that lifts the wheels in and out when it's flying." The lifts were installed around 1961, about a year before he first showed it. It was the second car Ron installed lifts on, and it might have been the third hydraulic lifted custom in the world. Photo courtesy of Roy Abendroth.
The Busonic custom as it appeared in 1962, after Roy and Larry Watson had given it a Busonic Bronze Metalflake paint job at Watson's Paramount shop. Known as The Busonic, Roy showed the car once, in an unfinished state, before it hit the show circuit in 1962. In 2020, Roy couldn't remember how much he paid for the lifts, but he told Kustomrama that it wasn't all that much at the time, "I don't think it was even 500 dollars. I doubt it was that much." Photo from The Larry Watson Collection, provided by Roger O'Dell.
Photo by George Barris
Photo by George Barris
The BuSonic at an indoor car show.
In 1964 Larry Watson resprayed the car green. This photo was taken in 1968, right before the car went into storage.
The car as it appeared after Jim Breazeale bought it.
Abendroth-busonic2.jpg
Abendroth-busonic3.jpg
The BuSonic during its restoration. Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
Photo by Mark Selkirk
The restored version of the car.
Roy-abendroth-1955-buick-busonic4.jpg
Roy-abendroth-1955-buick-busonic5.jpg
Roy-abendroth-1955-buick-busonic6.jpg
The car as it sat in 2007. Photo by Matt McFarland
The BuSonic was one of the featured cars at the first Customs by the Sea car show in Santa Barabara in 2019. Photo by Sondre Kvipt - Kustomrama.

1955 Buick Century restyled by John Schott for Roy Abendroth of Compton, California. Known as the BuSonic, the Buick was Roy's first car. It was rebuilt over a three-year period beginning in 1959.[2]


Roy bought the brand-new Buick for 3300 dollars in 1956. He had just come out of high school, and it didn't take a long time before he had given the Century a mild makeover. "We tunneled it," he told Sondre Kvipt in 2020. "We lifted the floorboards up where the driveshaft goes and C-framed it. We cut the rear frame up and used heavy metal, so when you drop down, the axle doesn't bang the frame." Roy did all that work himself. The car was black when he got it, and the father of the girl he was dating at the time, John W. Schott, helped give it a scallop paint job. This iteration of the car hit the streets around 1958.[3]


In 1959, when Roy was 22 years old, he decided to go radical with the Buick. During the rebuild, the stock rear fenders were removed and replaced with 1957 Lincoln fenders that had scoops fabricated at the front. In the rear, the fenders were reformed to house triple high-mounted exhausts. Also, in the rear, two complete 1956 Cadillac bumpers were purchased for rear guards. Each side had two outer tips with a 3-inch section added between them, holding three 1959 Cadillac taillights. The fenders were shaped to fit, and as with all other parts, rubber gaskets were made up to seal the fit between the body and the special components. The decklid was tapered in two inches at the rear and new sills were formed to fit. A bellypan in the rear necessitated raising the gas tank 6 1/2 inches and putting in a new rear floor. The license plate holder and nerf bar was mounted directly to the frame through the pan. The mesh was hand-made. All the door corners were rounded. Up front, the hood was cut off and sectioned 4 inches. The new grille opening and the canted quad headlight tunnels were formed using tubing. The front nerf bars matched the design theme of the rear license bracket.[2]


Hydraulic Lifts by the Aguirres

Once Roy and Schott had completed the bodywork, Roy took the car to Larry Watson for a sparkling Metalflake paint job. Roy told Watson that he was interested in something different for the car. Watson, who had also painted Ron Aguirre's X-Sonic, told Roy about the lifts Ron had installed on his Corvette to adjust the ride height by the touch of a button. That was something brand new that caught Roy's interest, so he approached Aguirre about having him install lifts on his Buick as well. Ron accepted the offer, and Roy drove the car up to Fontana to have him install lifts upfront. "I took it over to him after the bodywork had been finished, while it was still in primer." Afraid of damaging the paint during the operation, he figured out it was safer to install the lifts before paint. "Ron took it apart and put all the lifts in. From what I understand, the lifts were built from parts from an aircraft. Like a piper cup or something like that. Componentes that lifts the wheels in and out when it's flying." The lifts were installed around 1961, about a year before he first showed it, making Roy's Buick one of the earliest lifted cars we have come across. It was the second car Ron installed lifts on, and it might have been the third hydraulic lifted custom in the world. Roy believes Ron's dad did most of the work. He also believes that Ron and his dad didn't install lifts on any other cars after the Buick, but he can't confirm that. "I know that mine was the second one after the Vette, but I haven't heard that he did any others after mine." In 2020, Roy couldn't remember how much he paid for the lifts, but he told Sondre that it wasn't all that much at the time, "I don't think it was even 500 dollars. I doubt it was that much."[3]


Copper Metalflake Paint by Larry Watson

After the lifts had been installed, the car was painted in Copper Metalflake by Larry Watson of Watson's House of Style. The wheels were Cadillac wires adapted with spacers. The interior of the car was upholstered by Paul's Custom Upholstery Shop. It featured a console, FM radio, record player, bucket seats and fur trim. Under the hood, all of the detail pieces of the engine were chromed. The build was completed in 1963, having a total cost of $8,000. USD.[2]


Resprayed Green

Larry Watson resprayed the BuSonic green in late 1964. In 1968 the car went into storage. Jim Breazeale found the car and decided to restore it back to its 1963 incarnation. Jim had the Watson-applied spray replicated in modern candies, metallics and flake.[4] The restored version was painted by Don Heckman. Jamie Stormes did the pinstriping.[5] In June of 2008, the car was listed for sale; the asking price was 77,000 USD.[6]


For Sale

Around 2012 Alex Gambino of Gambino Kustoms bought the car with a friend. It was a trailer queen when he got it, and in 2019 he told Sondre Kvipt of Kustomrama that "it has never been driven on the street its whole life. I'm the only person that ever drove it. Back in the day, the rumor was that the 3rd and 4th gear linkages weren't connected, so no one could drive it." Gambino drove it twice about 4 miles for a photo shoot. Except for that, it gas just been driven on and off trailers. The car is currently up for sale, so get in touch with Alex Gambino if you want to become the BuSonic's new caretaker. Alex can be reached at gambinokustoms@yahoo.com or 408-561-5744.[7]


Magazine Features

Popular Hot Rodding October 1963
Car Craft January 1964
Car Craft February 1964
Rod & Custom May 2005
Gasoline Magazine 1/2021


References




 

Did you enjoy this article?

Kustomrama is an encyclopedia dedicated to preserve, share and protect traditional hot rod and custom car history from all over the world.




Can you help us make this article better?

Please get in touch with us at mail@kustomrama.com if you have additional information or photos to share about Roy Abendroth's 1955 Buick Century - The Busonic.


This article was made possible by:

SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!

Do you want to see your company here? Click here for more info about how you can advertise your business on Kustomrama.


Personal tools
Help us
facebook