Rene J. Leonhard's 1938 Chevrolet

From Kustomrama
Jump to: navigation, search
As it appeared in Rod & Custom December 1953 Photo by Billy O. Boyles

1938 Chevrolet business coupe owned and restyled by Rene J. Leonhard of Corpus Christi, Texas. After selling his 1949 Buick Convertible, he started looking for a Ford coupe. While searching one day, he came across a 1938 Chevrolet business coupe. He began tinkering with the idea, and figured out it did not need as much of body modifications as the Ford. The windows were narrow, so he did not have to chop the top, and there was not a great deal of space between the rear of the doors and the rear fenders, as is the case with most Ford coupes. He decided to buy it, and after paying $35, he hauled it to his home. He began by removing the stock engine and transmission, took the front and rear suspension out, and removed the body. The chassis was then stepped 6" and shortened 3", which gave the car a wheelbase of 100". The body was lowered about two inches over the frame rails as well. He got hold of a Columbia rear end, and installed the Oldsmobile Rocket 88 engine and Hydramatic trans which had previously powered the Buick. He decided to take out the engine and trans of the Buick for just such a possibility as this Chevrolet. He welded on a narrowed Olds crossmember and installed a torque tube drive using a 1940 Mercury driveshaft that was chopped two feet and fit with 3.54 gears. It turned out on the first road test that this did not work, it howled as a lonely wolf. After a lot of machining and configuration, he made it work by using Oldsmobile and custom made parts with 3.78 gears for better acceleration. The radiator was from a 1941 Buick Roadmaster, securing enough cooling. He made a dual intake by using 1950 Ford pots.[1]


The front and rear fenders were from a 1940 Pontiac, along with the hood. The front fenders were unchanged, but the hood was another story. It had to be shortened a foot, widened at the front and narrowed at the rear to fit the Chevy's contour. When he installed it, he realized it was no clearance between the hood and carb. This problem was solved by cutting a 1939 Chevrolet headlamp in two and weld it on top of the hood, making more that enough clearance, and forming a scoop. The rear fenders presented yet more problem, which was solved with lead. He used 11 1/2 pound on the right fender, and 9 1/2 on the left. Leo said he got better as he went along, which explains the difference amount. The grille was a 1942 Ford unit, without the original center section. The seat was from a 1940 Ford upholstered in eggshell white and black, and the dash from a 1949 Mercury. The steering wheel was a Buick unit. In the rear the installed a set of 1941 Chevrolet taillights, mounted sideways. The deck lid could open and close by just the push of a button. The car was painted Canto Cream white when finished. It featured dual spotlights, fender skirts, and 1947 - 1952 Cadillac Sombreros on blackwall tires.[1]


Magazine Features and Appearances

Rod & Custom December 1953


References



Promote your shop, show or business on Kustomrama - This ad space can also be bought to promote cars for sale or to hunt down rare parts you're looking for. Click here for more info...

 

Did you enjoy this article?

Kustomrama is an online encyclopedia dedicated to traditional hot rod and custom cars. Our mission is to protect, preserve and share traditional hot rod custom car history from all over the world.




Help us make this article better

If you have additional information, photos, feedback or corrections about Rene J. Leonhard's 1938 Chevrolet, please get in touch with Kustomrama at: mail@kustomrama.com.


This Article Was Made Possible By:

SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!

Do you want to see your company here? Click here for more info about how you can become a Kustomrama advertiser and supporter.


Personal tools
Please Help Kustomrama
facebook
Recommended reading