Don Ferrara's 1949 Ford

From Kustomrama
(Redirected from Don Ferrera's 1949 Ford)
Jump to: navigation, search
Don-ferrera-1949-ford-4.jpg
Don-ferrera-1949-ford-5.jpg
Don-ferrera-1949-ford-6.jpg
Don-ferrera-1949-ford-7.jpg
Don-ferrera-1949-ford-8.jpg
Don's Ford at the Motorama.
Don-ferrera-1949-ford-10.jpg
Don-ferrera-1949-ford.jpg
Don-ferrera-1949-ford2.jpg
Don-ferrera-1949-ford3.jpg

1949 Ford owned and restyled by Don Ferrera. Don worked as a fireman and decided to restyle his Ford while he was on vacation to southern California. Don nosed and decked the car. The hood was also peaked. The stock grille was removed, and the lower leading edge of the hood was extdended down to the approximate position of the old grille's lip bar. Don added a tapered, protruding flange to the lower edge. The flange carries the contour of the hood down just under the headlights and around the front fender panels. The headlights were tunneled, and fit with a short, solid cover lid at the top. This was done by using 1951 Ford headlight rims solidly brazed and molded to the exterior of the fenders. 1952 Ford headlight rims were fitted and used inside. The homemade grille was made from 1952 Lincoln bumper components. When the car was featured in Trend Book 116 Custom Cars 1955 Annual the grille was not completely done yet as it war missing a small floating chrome bar that was supposed to fill in the large blank area just below the hood. The front fender wheel opening were closed-in at the top slightly by using sheet metal and a short molded flange. The contour of the Mercury skirts were altered to the extent of being narrowed slightly from the top. The leading edge was cut in a more vertical line, while the trailing edge had a nice rounded drop. The door handles were shaved and replaced by electric solenoids. The outside pushbuttons were positioned in the forward section of the stock chromed strip on each side. The decked trunk lid was also electrically operated. Side strip, rear bumper, and the trunk hinges were replaced by 1950 Ford items. A Chevrolet rear license plate bumper bracket was adapted to the 1950 Ford rear bumper. The stock taillights were discarded, and the frames widened in order to fit two 1952 Buick taillight lenses each. The gas filler was also removed, and repositioned into the trunk.[1]

Don's shoebox was powered by an Oldsmobile power plant. The car was lowered 2 inches in the rear using lowering blocks. The car run in 7.10 x 15 tires in front, and 7.60 x 15 in the rear. The car was painted in a 1953 Cadillac Pastoral blue.[1] Total cost of the build was only $ 400.


Magazine Features

Honk October 1953
Car Craft May 1954
Trend Book 116 Custom Cars 1955 Annual


References




 

Did you enjoy this article?

Kustomrama is an encyclopedia dedicated to preserve, share and protect traditional hot rod and custom car history from all over the world.




Can you help us make this article better?

Please get in touch with us at mail@kustomrama.com if you have additional information or photos to share about Don Ferrara's 1949 Ford.


This article was made possible by:

SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!

Do you want to see your company here? Click here for more info about how you can advertise your business on Kustomrama.


Personal tools
Help us
facebook