Horace Davi's 1949 Ford
Horace was keen on a custom car, but he also wanted to use the car for his shampoo business. Ford's Ranchero was not available at the time and Davi's idea was still new. According to Car Speed and Style October 1958 Horace went to the wrecking yard and found a totaled 1949 Ford Convertible, but in Rod & Custom May 1955, it reads that Joe Bailon went to the wrecking yard and found a demolished 1950 Ford 2-door Sedan to use as a starting point. Anyway, Davi brought it over to Bailon's Custom Shop and discussed the design together with Joe. For all practical purposes, the car was completely stripped down to the frame before the construction work began.
The basic body shell had to be restored to its original form as well before the customization could begin. The body was first sectioned 4 inches according to Car Speed and Style, however Rod & Custom says 5 inches. The windshield was chopped 3 inches and fit with a removable top. According to Car Speed and Style October 1958, the top was built completely by hand. it was easily removable and could be revomed by one man whenever the weather would permit it. In Rod & Custom May 1955, the story was that a small coupe top was salvaged from the wrecking yard and re-contoured to fit the body lines. In order to match the lower body lines, the front fenders had to be trimmed off the bottoms, and the wheel cutouts raised the same amount so the tires could turn. Due to the body setioning and fender reworking, the grille cavity was reduced enough so that the crew thought it looked too good to spoil, so they did not add grille bars. The low grille opening caused colling problems, so the hood was louvered to cool down the engine compartment. All four wheel wells were radiuced, this required reworking of the inner wheel housings.
The biggest problem converting the Convertible into a pickup was the stiffening of the rear quarter panels. The bed was made from heavy weatherproof plywood which was secured to channels set along the inner side of the quarter panels, just high enough to clear the kickups over the rear axle housings. Chrome rails made from bar stock were placed on top of the quarter panels. The windsplits on the rear fenders had to be reshaped in order to accept the Pontiac taillights. The hood was nosed and the headlights were frenched, the door handles were flushed as well. The rear bumper was swapped with a 1946 Oldsmobile unit. A 1951 Cadillac front bumper was reworked to fit the car. The exhaust outlets were placed on both sides the rear quarter panels. Once the bodywork was completed, it was painted red with a black top. Dual spotlights and modified 1953 Cadillac hubcaps wrapped up the stye. Davi took it over to the East Oakland Auto Toggery where he found the perfect fabric to reupholster it with. The interior was done in red and gray pleated leatherette. The car took eight months to build and cost $4500 to complete.
Did you enjoy this article?
Kustomrama is an encyclopedia dedicated to preserve, share and protect traditional hot rod and custom car history from all over the world.
- Help us keep history alive. For as little as 2.99 USD a month you can become a monthly supporter. Click here to learn more.
- Subscribe to our free newsletter and receive regular updates and stories from Kustomrama.
- Do you know someone who would enjoy this article? Click here to forward it.
Can you help us make this article better?
Please get in touch with us at email@example.com if you have additional information or photos to share about Horace Davi's 1949 Ford.
This article was made possible by:
SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!
Do you want to see your company here? Click here for more info about how you can advertise your business on Kustomrama.